Demo Hire (hire package)DEMO-HR03

Prestart: Demo Handler Co DT-35 telehandler (DEMO-HR03)

Your name

Your name and signature record who did this check. They do not prove a licence.

Hour meter reading

Read it off the machine's hour meter, in hours. Last reading: 1357 h.

Location (optional)

Walk-around checks 40 questions

Fluids: oil level OK?

Yes No Unsure

Fluids: coolant level OK?

Yes No Unsure

Fluids: hydraulic level OK?

Yes No Unsure

Greasing: when was it last done?

Grease points are due every 3 days or 30 machine hours, whichever comes first.

Today Yesterday 2+ days ago

Paperwork on board?

SWMS, risk assessment and operator manual.

Yes No

Defects from the previous shift noted and actioned?

Yes No N/A

Your training and telehandler licence (TV): up to date

This is about you, not the machine.

Yes No Unsure

Task suits the machine, and the load rating is cut for the attachment and reach

The attachment's weight and a longer reach both cut what you can safely lift.

Yes No Unsure

Hazards and route checked: powerlines, other plant, ground that carries the load

Choose N/A if you are not moving or lifting yet.

Yes No N/A

Maintenance up to date to the maker's schedule

Yes No Unsure

Maker's own pre-start checks: done

Yes No Unsure

Bystanders clear of the work area, and a spotter used if needed

Choose N/A if you are not moving or lifting yet.

Yes No N/A

Guards: fitted, secure and working

Do not operate if a guard is missing or faulty.

Yes No Unsure

Safety signs and decals: present and readable

Yes No Unsure

Tyres: inflated to the specified pressure, no cuts or bulges

Yes No Unsure

Wheels and wheel nuts: none missing or loose, no rust trails

Yes No Unsure

Mirrors: clean, in place and adjusted

Yes No Unsure

Cab windows: clean and not cracked

Yes No Unsure

Hydraulic hoses and rams: no leaks, rubbing or damage

Yes No Unsure

Engine bay: no leaks or built-up dirt

Yes No Unsure

Fire extinguisher: fitted, charged and in date

Check the gauge is in the green and the tag is in date.

Yes No Unsure

Seat belt: fitted, latches and is not frayed

If it is missing or will not latch, choose No.

Yes No

ROPS (rollover protection): structure undamaged, no cracks or missing bolts

Look for cracks, bends, welded repairs and bolts that are missing or loose.

Yes No

FOPS (falling object protection): roof and guards undamaged, no missing bolts

Look for dents, cracks and bolts that are missing or loose.

Yes No

Cab door: closes and latches

Yes No Unsure

Controls, including the load limiter: all work correctly

Joystick and controls return to neutral.

Yes No Unsure

Overload indicator: working

Yes No Unsure

Transport lock-out switch: operates

Yes No Unsure

Key switch and emergency stop: work

Yes No Unsure

Horn, reversing signal and flashing beacon: all work

Mark off any the machine does not have.

Yes No Unsure

Lights: headlights, brake lights and work lamps working

Yes No Unsure

Steering, including each steer mode: smooth, no sloppy play

Yes No Unsure

Service brake and park brake: telehandler stops and holds when tested

Test slowly in a clear area. If it does not stop or hold, choose No.

Yes No

Boom: extends and retracts smoothly, no jerking or creep

Yes No Unsure

Boom: raises and lowers smoothly and holds without drifting

Yes No Unsure

Boom sections, wear pads and chains: no cracks, damage or excess play

Yes No Unsure

Attachment: approved for this machine, compatible and well maintained

Use only attachments from the maker or approved by the maker.

Yes No Unsure

Attachment carriage and locking pin: attachment is locked on and cannot come off

Wiggle the attachment and check the lock is fully engaged. If not, choose No.

Yes No

Load chart for this telehandler and attachment: in the cab, current and readable

Check it matches the attachment fitted. If it is missing or unreadable, choose No.

Yes No

Stabilisers and pads: undamaged, hold when set down

Yes No

Sign off Demo Handler Co DT-35 telehandler (DEMO-HR03)

Any new defects to report?

Describe anything wrong. Leave blank if nothing.

Machine safe to operate?

Choose No if you have any doubt. The machine will be tagged out.

Yes No

Sign with your finger

A drawn signature is required. Use your finger or a stylus in the box. If you cannot sign here, ask the person in charge of this machine to help you before you start.

Help